Original Sentinel Mode Recording Activation Notification Sticker for Tesla All Model

✅ Compatible With: All Tesla Model

🚗 Sentry Mode Security Warning Decal

Premium transparent ORAFOL car sticker to warn that your vehicle’s Sentry Mode is active with 360° monitoring.

Let pedestrians and passersby know your vehicle is under 360-degree camera & alarm monitoring with our minimalist Sentry Mode sticker. Perfect fit for side camera trim, car windows, interior dash panels and other smooth surfaces, ideal for Tesla owners.

✨Key Features

Premium German ORAFOL PVC Material

High transparency, flexible and durable for automotive use

MIMAKI UV Ink Printing

Vivid, fade-resistant color, waterproof & sun-proof for long-term outdoor use

Precision Machining

Produced by multi-process imported equipment for crisp, clean edges

Comes with Transfer Film

Simple positioning and hassle-free DIY installation

📌 Surface Adhesion Guide

✅ Smooth Surfaces (Car Paint, Window Glass)

100% adhesion – Recommended

⚠️ Matte Surfaces (Interior Trims)

80% adhesion – Test with clear tape before applying

❌ Large Curved Surfaces (Helmets, Extreme curved parts)

60% adhesion – Not suitable

💡 Important Tips

1. Do not wash your car within 48 hours after application to ensure full adhesion.

2. Avoid scrubbing small stickers aggressively with towels after washing, as this may cause edge lifting. This type of man-made damage is not covered under quality warranty.

3. If you encounter any installation issues, feel free to contact our support team for guidance.

🛠️ Step-by-Step Installation

Step 1: Clean the Surface

Clean and fully dry the target surface.

Step 2: Peel the Sticker

Peel the sticker together with the pre-attached transfer film away from the backing sheet.

Step 3: Align and Apply

Align and place the sticker on the surface, then use a plastic card to squeeze out all air bubbles.

Step 4: Press Firmly

Press firmly to ensure the decal sticks completely to the surface.

Step 5: Remove the Transfer Film

Slowly peel off the top transfer film.

Step 6: Installation Finished

Installation finished!

FAQ

1.What material is the sticker made of? Will it fade outdoors?

A: It is made of premium German ORAFOL transparent PVC with MIMAKI UV ink printing. It is waterproof, sun-resistant and anti-fade for long-term outdoor use.

2.Can I install it by myself? Is transfer film included?

A: Yes, DIY installation is totally doable. Every order comes with pre-attached transfer film to help you align the sticker easily. We also list the step-by-step installation guide on the product page.

3. How long should I wait before washing my car after installation?

A: Please wait 48 hours after applying the sticker before car washing, to make sure the adhesive bonds fully. After that, avoid hard scrubbing the sticker edge with towels to prevent peeling.

4.Can I remove the sticker later? Will it leave residue on my paint/glass?

A: The ORAFOL film is removable. When peeled off gently, it generally leaves minimal or no sticky residue on standard automotive paint and glass. Prolonged exposure under extreme heat may increase residue possibility.

5.Why does the color look slightly different from the photos?

A: Minor color variation may appear due to different lighting, angles and screen display differences. If you are extremely strict on color matching, please consider carefully before ordering.

6.Does this sticker activate the actual Sentry Mode function of the car?

A: No. This is only a decorative warning decal to notify passersby that Sentry Mode may be active. It cannot enable or modify your vehicle’s built-in Sentry Mode system.

7.What should I do if the sticker lifts or bubbles after installation?

A: Small bubbles can be pushed out with a plastic card right after installation. If edge lifting occurs caused by improper installation or post-wash heavy rubbing, it is not covered by quality issue. Feel free to contact our support for installation troubleshooting.