Side Mirror Rain Guards & Wind Deflectors for 2025+ Tesla Model Y Juniper & Model Y L

✅ Compatible With：

• 2025.02+ Tesla Model Y Juniper Premium
• 2025.10+ Tesla Model Y Long Wheelbase

❌ Not Compatible With: 2020–2025.02 Tesla Model Y

Includes：

• 1 × Left Side Mirror Rain Guard
• 1 × Right Side Mirror Rain Guard
• Pre-Applied 3M Adhesive Tape

Material: ABS Plastic

Give your Tesla Model Y Juniper or Model Y L a clean, factory-inspired upgrade. These ABS side mirror rain guards feature built-in drainage channels to guide water away from the lower mirror housing while allowing normal mirror folding.

Key Features

1. Water-Channeling Design

Built-in drainage grooves help direct rainwater away from the lower mirror housing, reducing water buildup in rainy conditions.

2. Seamless OEM-Style Fit

The low-profile, matte black design follows your Tesla's original mirror contours for a clean, factory-inspired look.

3. Unobstructed Mirror Folding

Designed to fit beneath the factory side mirrors without interfering with normal folding or requiring mirror cap replacement.

4. Custom Fit for Model Y Juniper & Model Y L

Precisely contoured for compatible refreshed Tesla Model Y mirrors, with matching left- and right-side guards.

5. Durable ABS & Easy 3M Installation

Made from lightweight ABS plastic with pre-applied 3M adhesive. Simply peel and stick—no drilling or mirror disassembly required.

Installation Tips

1. Clean the Surface: Thoroughly clean the underside of each side mirror to remove dust, dirt, wax, and grease.

2. Dry Completely: Make sure the mounting surface is clean and dry.

3. Test Fit Before Installation: Check the position and alignment of each guard before removing the adhesive backing.

4. Peel & Stick: Remove the protective film from the pre-applied 3M adhesive and carefully position the guard.

5. Press Firmly: Apply even pressure along the adhesive area to ensure proper contact.

6. Allow the Adhesive to Bond: Avoid washing the vehicle or exposing the guards to heavy rain for at least 24 hours after installation. Follow the adhesive manufacturer's curing guidance where applicable.

7. Check Mirror Folding: Slowly fold and unfold the mirrors to confirm clearance.

Important: For best adhesion, install on a clean, dry surface at a moderate temperature.

FAQ

Q1: Will these rain guards keep my side mirrors clear in the rain?

They help channel rainwater away from the lower mirror housing, reducing water buildup. However, they won't completely prevent raindrops from reaching the mirror glass.

Q2: Will they affect my Tesla's automatic mirror folding?

No. They're designed to fit beneath the original mirror housing without interfering with normal folding.

Q3: Do I need to remove or modify my original mirrors?

Not at all! These guards attach directly beneath your existing side mirrors using pre-applied 3M adhesive. No drilling, disassembly, or permanent modifications are needed.

Q4: Will the 3M adhesive hold up in rain and during car washes?

The pre-applied 3M adhesive provides a secure bond when installed correctly. For best results, clean and dry the surface thoroughly and allow at least 24 hours for initial bonding before washing your car or exposing it to heavy rain.

Q5: Can I remove them without damaging my Tesla?

Yes, they can generally be removed using gentle heat and careful adhesive removal. Some adhesive residue may remain, so take care to protect the original mirror finish.